VARIOUS AUTONOMOUS RECORDING MODES

Continuous Recording Mode

This mode is activated automatically when you start the car.
Recorded videos are saved in one-minute segments with an auto-looping mechanism.

Event Recording Mode

The active impact monitoring system will automatically store the video data
10-seconds prior to and after a collision registered by the 3-axis G-Sensor,
saving a 20-second video into the designated Event Detection folder on the
memory card. No searching through hours of footage to find the right video. Easy.

Manual Recording Mode

By pressing the Manual Recording button your Thinkware Dash Cam
will capture events that occur in front of your vehicle whether or not it is in motion. Manual Recording Mode will save 10-seconds prior to and 50-seconds after the button press saving a 1-minute video into the designated Manual Recording folder on the memory card.

 

Parking Surveillance Mode*

Once your vehicle is turned off Thinkware Dash Cam will enter Parking Surveillance Mode,
combining impact detection with motion detection or time lapse (if supported)
*Parking Surveillance Mode requires the use the Hard Wiring Cable (HWC)

COMPREHENSIVE DRIVING INFORMATION WITH GPS

With the GPS Tracker, Thinkware Dash Cams can record the vehicle's driving speed and provide its precise location and routes identification on the map. The GPS Tracker helps you to accurately assess the details of the surrounding area by providing you with the vehicle speed, the time of a collision, and the severity of the impact.

The video recording feature not only stores driving footages in the case of an event, but it can also be used to track your holiday travel routes.

SAFETY CAMERA ALERTS^*

Thinkware Dash Cams GPS provides accurate location information while the Safety Camera Alert function is on continuous alert to warn the driver of red lights and traffic enforcement cameras.

Cultivate safe driving habits with THINKWARE DASH CAM.

*requires GPS

PC VIEWER FOR CHECKING CLEAR AND PRECISE VIDEO

The intuitive and easy-to-use interface of THINKWARE DASH CAM PC VIEWER allows you convenient access to your 
recorded videos with G-sensor and GPS data such as speed and location. Compatible with both PC and Mac. 

You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the PC Viewer.

SOPHISTICATED IMPACT DETECTION

The X, Y, Z axes of the G sensor allow you to measure fluctuations in gravity, speed or rotation. You can figure out the axial movement and impact during an accident at a glance.

DUAL SAVE

THE NEW STANDARD FOR DASH CAMS:​ DUAL SAVE

Dual Save technology is specially designed to save recorded footages in both the microSD memory card and the built-in internal memory in incident recording mode. It functions as a safeguard against the possible loss of data in the aftermath of a severe collision. In the event that the memory card gets damaged, the Dual Save Technology guarantees a backup copy of the video in the internal memory of the F200.

* The Dual Save Technology is activated when a specific level of impact is detected (The impact sensitivity is adjustable in the Dash Cam's settings).

THERMAL PROTECTION, CAUSE AUSTRALIA GETS HOT!

All THINKWARE Dash Cams feature Thermal Protection and are specially designed for efficient heat dissipation, 
but if the extreme Aussie heat gets too much, a built-in thermal sensor protects the device and its data against intense heat by automatically turning it off to prevent overheating. 

FORMAT FREE TECHNOLOGY

Format Free Technology utilizes the TAT (Time Allocation Table) save system instead of the FAT (File Allocation Table) system. This allows THINKWARE’s proprietary Format Free Technology to eliminate the need for periodical manual formatting of recorded video files on the microSD memory card. It also helps extend the life of your memory card. You can view recorded video files on any PC or smartphone without having to worry about converting files. THINKWARE DASH CAM saves the hassle of manually clearing memory space.

All Front and Rear Thinkware Dash Cams purchased in Australia are covered by a 2-year warranty from the date of purchase.

Please note: We do not offer any warranty or repair service on Thinkware Dash Cams or accessories purchased from outside of Australia. You must provide a copy of your proof of purchase if making a warranty claim.

2 year warranty offer extends to genuine Thinkware front, rear and cabin cameras only and does not include other accessories.

Australian warranty is offered by the Australian distributor of Thinkware Dash Cams, TDJ Australia.

SPECIFICATIONS